<<SAMSUNG>>

--------------------------------------------------------------------------------

Samsung sph-n240, n400, a460, a500, etc Nam Programming:

Nam Set: ##Spc

Test Mode: 47*869#1235

Debug Menu: ##33284,ok

Service Menu: Menu+8+0 (#889)

Reset (Life time, Clear Memory, etc): ##786,ok

A-key: ##2539,ok

Label Selection: ##3882,ok

Label(Home, Work, etc) : **523,ok

NGG Setting (Gateway, etc.): ##2769737,ok

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming:

Nam Set: 47*869#08#9

Nam Set: Menu+60

Test Mode: *759#813580

Test Mode: 5809540*45680

A-key: Menu+0, 25##

External Audio: Menu+0, ####

Debug Menu: Menu+8, 0415 or Spc

Debug Menu: Menu+9, 0415 or Spc

Brief NAM Programing: Menu+40,626 (not all version)

LCD Contrast: Menu+45 (not all version)

SIO Mode: Menu+49

SIO Mode: Menu+69

Samsung a300, a530, etc Nam Programming:

Test Mode: 47*68#13580

Samsung e170, e250, e300, X-series, etc Nam Programming:

Nam Set: 6548#0**4#6

Nam Set: 74153697193

Test Mode: 5809540*45680

Debug Menu: Menu(2sec)+0, 6725 or 9720

TEST MODE COMMANDS:

411_test_mode.txt

811_test_mode.txt

n105_test_mode.txt

n240_test_mode.txt

n260_test_mode.txt

a500_test_mode.txt

a530_test_mode.txt

<<KYOCERA>>

--------------------------------------------------------------------------------

Qualcomm qcp-800 Nam Pogramming:

Nam Set: Menu+3+0+Spc

Field Test: Menu+7+0+Fsc

Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:

Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Life Timer, PRL, etc: ##786,ok

A-key: ##2539,ok

A-key: 2539,ok

<<SANYO>>

--------------------------------------------------------------------------------

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:

Nam Set: ##Spc+Ok+Key Down+Ok

A-key: ##2539+Ok+Key Down+Ok

Version: ##**837+Ok+Key Down+Ok

Debug Menu: ##FSC+Ok+Key Down+Ok

Airtime menu: ##8463+Ok+Key Down+Ok

Change CAI: ##7738+Ok+Key Down+Ok

Vocoder: ##8626337+Ok+Key Down+Ok

Reverse Logistic: ##786+Ok+Key Down+Ok

Set IP Address: ##2769737+Ok+Key Down+Ok

TTY On/Off: ##889+Ok+Key Down+Ok

Advanced Data: ##3282+Ok+Key Down+Ok+Msl

Ready Link: ##4636+Ok+Key Down+Ok

Browser Init On/Off: ##4682+Ok+Key Down+Ok

Picture Token: ##25327+Ok+Key Down+Ok

Unknown Code: ##5282277+Ok+Key Down+Ok

(SPC=000000, FSC=040793)

Sanyo scp-A011, smp-A017 Nam Programming:

Nam Set: F9(3 beep) + 0*72696#767

<<NOKIA>>

--------------------------------------------------------------------------------

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

Esn Number: *#92772689#

Restart Phone: *#75681#

Restart Phone: *#75682#

Nokia 8887 Nam Programming:

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#8378#

Esn/Data/Timer: *#92772689#

SID: *#743#

Nokia 8587 Nam Programming:

Nam Set: *#626#7764726#

Version: *#0000#

Vocoder: *#3872#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#

SPC Unlock, Factory Reset:

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)

NOKIA TEST MODE:

51xx, 61xx, 71xx, 3285, 63xx, etc:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 0 0 and then choose OK.

3360, 6360:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.

<<AUDIOVOX>>

--------------------------------------------------------------------------------

Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:

(Power the phone on and wait until the little light on top goes out)

Nam Set: 289+fcn+#+1

Service menu: fcn+00+fsc(000000)

Test Mode: Hold (2,*,Rcl)+Power

Test Mode Commands:

99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code

129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range

Audiovox pcx-3500xl Nam Programming:

Nam Set: ##2726+Send+1998+1+Spc+1

Audiovox cdm-100, 130, 135, 8300, 8600, etc Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc

Audiovox-107 Nam Programming:

Nam Set: 45680*47*869#1

Audiovox 9950 Nam Programming:

Nam Set: ##3282

AUDIOVOX TEST MODE:

9100, 9155:

1) Turn on the phone. As soon the phone comes on and the green light

turns off press RIGHTARROW, 0, 0. The phone will ask for the

"FSC Code", press 000000 then choose OK and press RIGHTARROW,

RIGHTARROW. Your phone is now in test mode.

2) The signal strength is the number on the top right hand side of the screen.

3) To turn off test mode shut of the phone and then turn it back on.

<<MOTOROLA>>

--------------------------------------------------------------------------------

Motorola 7760, 7860, 2260, 8160, etc Nam Programming:

Nam Set: Fcn,0000000000000, Rcl

Test Mode: Fcn, 00**83786633, Sto

Motorola v60c, v120c etc Nam Programming:

Nam Set: 74663#, Menu, Menu, Spc

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284

Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to "PrefMod"

4) RIGHT Softkey (Change) until you see "DigOnly"

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)

Motorola v710, v730, v740, ms150, etc Nam Programming:

Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#

Motorola mc200, mc230, etc Nam Programming:

Nam Set: 5759789*# (spc - 915037)

MOTOROLA TEST MODE:

v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to "Enter a Security Code", press 000000, OK

3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"

choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then

quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow

the above sequence and scroll down to where it says "DISABLE" instead of

"ENABLE" and choose select.

Motorola Bible - bible.txt

<<LG>>

--------------------------------------------------------------------------------

lgc-300, etc Nam Programming:

Nam Set: Menu, 9, Spc

A-key: Press "Sto" 3sec, 2539**

lgc-330w, etc Nam Programming:

Nam Set: Menu, 4, 0, Spc

A-key: 2539**

lgc-510, v111, etc Nam Programming:

Nam Set: Menu, 3, 0, Spc

A-key: 2539**

lgc-500, 800w, etc Nam Programming:

Nam Set: Menu, 9 , 0, Spc

Debug Mode: Menu, 7, 0, Fsc

Debug Mode: Menu, 8, 0, Fsc

A-key: 2539**

Lg LX,VX-series Nam Programming:

Nam Set: ##Spc

Advanced Settings: ##2342

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

A-key: ##2539,ok

Reset (Life time, Clear Memory, etc): ##786,ok

<<SK TELETECH>>

--------------------------------------------------------------------------------

Sky All Models Nam Programming:

Nam Set: #7583538324#626#

Test Mode: #7583538324#8378#

Service Menu: Menu+4+0+Spc

Service Menu: Menu+5+0+Spc

<<WITHUS>>

--------------------------------------------------------------------------------

Withus wce-100, 200, 300, etc Nam Programming:

Nam Set: ##948487+Save

Nam Set: ##948482+Save

wce-200 ESN write: ##66835+Save

(At the first programming)

<<HYUNDAI>>

--------------------------------------------------------------------------------

Hyundai hwp-110 Nam Programming:

Nam Set: #86904**89397#

DM Mode: ##2740*

(Open phone, inter code, close phone)

Hyundai hgc-120, 130, 200 Nam Programming:

Nam Set: #86904**89397#

Hyundai hgc-310, 600, 610 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code

Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code

A-key: 2539**

Debug Menu: ##27732726+Pwr

Sar Test: ##27752345+Pwr

Baud Rate: ##36**+Pwr

DM Mode Enable: **1004+Pwr

DS Mode Enable: **1005+Pwr

Test Bell/Voice/Led/Dot: ##1122+Pwr

RF Mode: ##2240+Pwr

Ras Ram: ##2774+Pwr

Cmux1: **0481+Pwr

Cmux2: **0482+Pwr

RX Mode Fax: **0492+Pwr

RX Mode Data: **0491+Pwr

RX Mode Reset: **0490+Pwr

<<HUAWEI>>

--------------------------------------------------------------------------------

Huawei ETS-668, 678, 688, etc Nam Programming:

Debug Mode: ##44+Menu

Debug Screen: ##33+Menu

CDG2 Test enable: ##234+Menu

CDG2 Test disable: ##432+Menu

China Lang Select: ##123+Menu

Blocking Debug Code: ###888+Menu

Home System Only On: ##461+Menu

Home System Only Off: ##460+Menu

<<ERICSSON>>

--------------------------------------------------------------------------------

Ericsson A1228c, T61, etc Nam Programming:

Short NAM: 987+Menu

Long NAM: 923885+Menu+Spc

CDMA Mode: 904093+Menu

Analog Mode: 904095+Menu

QNC: 904097+Menu

Debug Screen: 904090+Menu

DM Mode: 904050+Menu

Sony-Ericsson T608 Nam Programming:

Nam Set: 923885, Joystick to the right, 111111

<<EPSILON>>

--------------------------------------------------------------------------------

Epsilon vc-5x Nam Programming:

Nam Set: **147258963##

Programming1: **1232580##

Programming2: **321456987##

Version: **1470963##

Debug: **000000##

Menu_1: **078987##

Menu_2: **1234756##

A-key: 2539**

Reset: **14789##

<<GIGA TELECOM>>

--------------------------------------------------------------------------------

Z510, Z710i(gcd-456) Nam Programming:

Nam Set: Menu+0+Spc

<<AnyDATA>>

--------------------------------------------------------------------------------

AMC450 Nam Programming:

Nam Set: *74269#*748#96148063+SEL

<<GTRAN>>

--------------------------------------------------------------------------------

Gtran gcp-2000 Nam Programming:

Nam Set: 01#737+Spc

Debug Menu: 01#324+Spc

Debug Mode: 01#727

Test Mode: 01#764+Spc

System Test Mode: 01#768+Spc

Gtran gcp-5000 Nam Programming:

Debug Mode: 01#727+Spc

Test Mode: 01#765

<<PANASONIC>>

--------------------------------------------------------------------------------

PANASONIC TEST MODE:

Panasonic (Most):

1) Turn on the phone. Press #7764726# choose SEND

2) Scroll down to where it says "NAM 1" and choose OK. Scroll down

to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor"

and choose EDIT.

3) Press 1 and choose OK then choose BACK. The phone will say

"Back To Level 1" choose YES. Now choose EXIT the phone will ask you

"Exit And Save Change" choose YES.

4) Signal strength is the top right number on the screen.

5) To turn off the test mode follow the above sequence except press 0

instead of 1 at the "Built-In-Monitor"

<<SYNERTEK>>

--------------------------------------------------------------------------------

Synertec S200 Nam Programming:

Nam Set: Menu+0+Spc

Debug Mode:

Test vibro/rx/tx: ##5555+Save

Debug Screen: ##33+Save

Debug Screen: ##523+Save

RF Test: ####+Save

Unknown code: ##325+Save

<<SONY>>

--------------------------------------------------------------------------------

Sony CM-M1300, 3300, Z200 Nam Programming:

Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc

dateng aja ke galery M8 untuk di reset akey nya...

Kalo untuk NOKIA 2112, apa NAM bisa di reset?
Soalnya setelah di reset (*#7370#) di NAM1 malah muncul AMPS settings, dan network pun menghilang ... Searching for network...

Bantuin dong... pls......

Bos zauri88, mo nanya nih, gw punya pesawat portable flexi neotel itu lho yang suport dengan fax, masalahnya pesawat tsb injek tapi di bawah pesawat terdapat tempat ruim, ni yang mo gw tanyakan gmn caranya klo pesawat tersebut di gunakan dengan RUIM? sebelumnya trims

Setting NAM ini gunanya buat apaan sich? Kebetulan gue pake Kyocera 6035.

bung Cyber tolongin gwa donk buat seting NAM buat motorola V710 klo ga salah pekenya
8378*# + press 3 times NATE (spc - 071082).
yang gwa ga ngerti apa artinya press 3 times NATE soalnya dah gwa coba2 ga bisa juga trims

Kalo utk figo phone ada yg punya gak ya ?

Tambahan nih, untuk Modottel WTE 300 (utk WTE 320 bisa juga kali ..)

tekan ##948487
tekan OK (joy stick)
Masukkan SPC Code (000000)

Keluar menu sbb :
1. NAM Program
2. Voice Call
3. Para Change
4. Debug Screen
5. Auth Test
6. DS Setting & IP
7. Voice Priv

Masing-masing gunanya apa, tanya ke ahlinya ya ... gw belum kutak-katik.

Ada situs utk yang seneng kutak-katik nih, brkali berguna : [tautan dihapus]

Semoga membantu ....

Bos Ryan, untuk setting SPH A460 gak bisa dipakai
Nam Set: ##Spc=135798 gak bisa
Test Mode: 47*869#1235 OK
Tolong dong kasih solusinya.
Trim's

Bos ada settingan untuk Samsung SPHi700 CDMA gak?

Boss, untuk SPC A460 berapa??????
kalau tak pakai 135798 juga gak bisa, tolong dong kasih info spc-nya, trim's

PLEEAAAZZZZ HELP!!!! 6015 di restore factory setting pake *#7370# malah jd gak bisa search network. gmana Ne???? MOHON BANTUAN PARA SENIOR!!!!!

Bos HANSAMU_CHAN coba di tuning pake phonix C***K bisa kembali normal

ada yang tau NAM programing samsung SPH-V4400 tolongin donk..................

Ada yang tau setting injeck kyocera 6035 buat esia ngga? soalnya CS Esia ngga suport PDA-phone....

masa sih gak support pda phone?
kyknya support,yg samsung pda phone bisa kan?

6035 ini ada A-key nya kan?

Kalo gak salah org esianya aja yg masih belum ngerti ngoprek handsetnya..

kamaren soalnya sempetngobrol2 sama org esia.. kira2 gt jawabannya

gm cara nya membuat esn flesxi?
aku denger pakai starter pack flerxi trandy dapat langsung di injcek ke n356.

anna, aku bisa bantuin injek esia, tapi hrs bayar org esianya.

bisa ngak flexi dipake Audiovox dg 2 nomor dg kota yg berbeda

Mas Cyber ato Ryan, aku baru beli cdma 2280 (new) tp aku masukin flexi, logo operatornya muncul tulisan china, gimana cara ngilanginnya biar muncul logo Flexi? Pada menu setting bagian network service kan ada menu my number selection, apa maksudnya? trus jg pd setting network service bagian network feature setting tekan select muncul feature code, itu utk apa trus kodenya apa?

help2 ya...tq !

gw mau inject esia ke kyocera 7135 sama nih problemnya, cs esia blg ga bs kalo pda phone..
ada yg bs bantu?