<<SAMSUNG>>

--------------------------------------------------------------------------------

Samsung sph-n240, n400, a460, a500, etc Nam Programming:

Nam Set: ##Spc

Test Mode: 47*869#1235

Debug Menu: ##33284,ok

Service Menu: Menu+8+0 (#889)

Reset (Life time, Clear Memory, etc): ##786,ok

A-key: ##2539,ok

Label Selection: ##3882,ok

Label(Home, Work, etc) : **523,ok

NGG Setting (Gateway, etc.): ##2769737,ok

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming:

Nam Set: 47*869#08#9

Nam Set: Menu+60

Test Mode: *759#813580

Test Mode: 5809540*45680

A-key: Menu+0, 25##

External Audio: Menu+0, ####

Debug Menu: Menu+8, 0415 or Spc

Debug Menu: Menu+9, 0415 or Spc

Brief NAM Programing: Menu+40,626 (not all version)

LCD Contrast: Menu+45 (not all version)

SIO Mode: Menu+49

SIO Mode: Menu+69

Samsung a300, a530, etc Nam Programming:

Test Mode: 47*68#13580

Samsung e170, e250, e300, X-series, etc Nam Programming:

Nam Set: 6548#0**4#6

Nam Set: 74153697193

Test Mode: 5809540*45680

Debug Menu: Menu(2sec)+0, 6725 or 9720

TEST MODE COMMANDS:

411_test_mode.txt

811_test_mode.txt

n105_test_mode.txt

n240_test_mode.txt

n260_test_mode.txt

a500_test_mode.txt

a530_test_mode.txt

<<KYOCERA>>

--------------------------------------------------------------------------------

Qualcomm qcp-800 Nam Pogramming:

Nam Set: Menu+3+0+Spc

Field Test: Menu+7+0+Fsc

Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:

Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Life Timer, PRL, etc: ##786,ok

A-key: ##2539,ok

A-key: 2539,ok

<<SANYO>>

--------------------------------------------------------------------------------

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:

Nam Set: ##Spc+Ok+Key Down+Ok

A-key: ##2539+Ok+Key Down+Ok

Version: ##**837+Ok+Key Down+Ok

Debug Menu: ##FSC+Ok+Key Down+Ok

Airtime menu: ##8463+Ok+Key Down+Ok

Change CAI: ##7738+Ok+Key Down+Ok

Vocoder: ##8626337+Ok+Key Down+Ok

Reverse Logistic: ##786+Ok+Key Down+Ok

Set IP Address: ##2769737+Ok+Key Down+Ok

TTY On/Off: ##889+Ok+Key Down+Ok

Advanced Data: ##3282+Ok+Key Down+Ok+Msl

Ready Link: ##4636+Ok+Key Down+Ok

Browser Init On/Off: ##4682+Ok+Key Down+Ok

Picture Token: ##25327+Ok+Key Down+Ok

Unknown Code: ##5282277+Ok+Key Down+Ok

(SPC=000000, FSC=040793)

Sanyo scp-A011, smp-A017 Nam Programming:

Nam Set: F9(3 beep) + 0*72696#767

<<NOKIA>>

--------------------------------------------------------------------------------

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

Esn Number: *#92772689#

Restart Phone: *#75681#

Restart Phone: *#75682#

Nokia 8887 Nam Programming:

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#8378#

Esn/Data/Timer: *#92772689#

SID: *#743#

Nokia 8587 Nam Programming:

Nam Set: *#626#7764726#

Version: *#0000#

Vocoder: *#3872#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#

SPC Unlock, Factory Reset:

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)

NOKIA TEST MODE:

51xx, 61xx, 71xx, 3285, 63xx, etc:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 0 0 and then choose OK.

3360, 6360:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.

<<AUDIOVOX>>

--------------------------------------------------------------------------------

Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:

(Power the phone on and wait until the little light on top goes out)

Nam Set: 289+fcn+#+1

Service menu: fcn+00+fsc(000000)

Test Mode: Hold (2,*,Rcl)+Power

Test Mode Commands:

99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code

129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range

Audiovox pcx-3500xl Nam Programming:

Nam Set: ##2726+Send+1998+1+Spc+1

Audiovox cdm-100, 130, 135, 8300, 8600, etc Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc

Audiovox-107 Nam Programming:

Nam Set: 45680*47*869#1

Audiovox 9950 Nam Programming:

Nam Set: ##3282

AUDIOVOX TEST MODE:

9100, 9155:

1) Turn on the phone. As soon the phone comes on and the green light

turns off press RIGHTARROW, 0, 0. The phone will ask for the

"FSC Code", press 000000 then choose OK and press RIGHTARROW,

RIGHTARROW. Your phone is now in test mode.

2) The signal strength is the number on the top right hand side of the screen.

3) To turn off test mode shut of the phone and then turn it back on.

<<MOTOROLA>>

--------------------------------------------------------------------------------

Motorola 7760, 7860, 2260, 8160, etc Nam Programming:

Nam Set: Fcn,0000000000000, Rcl

Test Mode: Fcn, 00**83786633, Sto

Motorola v60c, v120c etc Nam Programming:

Nam Set: 74663#, Menu, Menu, Spc

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284

Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to "PrefMod"

4) RIGHT Softkey (Change) until you see "DigOnly"

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)

Motorola v710, v730, v740, ms150, etc Nam Programming:

Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#

Motorola mc200, mc230, etc Nam Programming:

Nam Set: 5759789*# (spc - 915037)

MOTOROLA TEST MODE:

v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to "Enter a Security Code", press 000000, OK

3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"

choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then

quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow

the above sequence and scroll down to where it says "DISABLE" instead of

"ENABLE" and choose select.

Motorola Bible - bible.txt

<<LG>>

--------------------------------------------------------------------------------

lgc-300, etc Nam Programming:

Nam Set: Menu, 9, Spc

A-key: Press "Sto" 3sec, 2539**

lgc-330w, etc Nam Programming:

Nam Set: Menu, 4, 0, Spc

A-key: 2539**

lgc-510, v111, etc Nam Programming:

Nam Set: Menu, 3, 0, Spc

A-key: 2539**

lgc-500, 800w, etc Nam Programming:

Nam Set: Menu, 9 , 0, Spc

Debug Mode: Menu, 7, 0, Fsc

Debug Mode: Menu, 8, 0, Fsc

A-key: 2539**

Lg LX,VX-series Nam Programming:

Nam Set: ##Spc

Advanced Settings: ##2342

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

A-key: ##2539,ok

Reset (Life time, Clear Memory, etc): ##786,ok

<<SK TELETECH>>

--------------------------------------------------------------------------------

Sky All Models Nam Programming:

Nam Set: #7583538324#626#

Test Mode: #7583538324#8378#

Service Menu: Menu+4+0+Spc

Service Menu: Menu+5+0+Spc

<<WITHUS>>

--------------------------------------------------------------------------------

Withus wce-100, 200, 300, etc Nam Programming:

Nam Set: ##948487+Save

Nam Set: ##948482+Save

wce-200 ESN write: ##66835+Save

(At the first programming)

<<HYUNDAI>>

--------------------------------------------------------------------------------

Hyundai hwp-110 Nam Programming:

Nam Set: #86904**89397#

DM Mode: ##2740*

(Open phone, inter code, close phone)

Hyundai hgc-120, 130, 200 Nam Programming:

Nam Set: #86904**89397#

Hyundai hgc-310, 600, 610 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code

Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code

A-key: 2539**

Debug Menu: ##27732726+Pwr

Sar Test: ##27752345+Pwr

Baud Rate: ##36**+Pwr

DM Mode Enable: **1004+Pwr

DS Mode Enable: **1005+Pwr

Test Bell/Voice/Led/Dot: ##1122+Pwr

RF Mode: ##2240+Pwr

Ras Ram: ##2774+Pwr

Cmux1: **0481+Pwr

Cmux2: **0482+Pwr

RX Mode Fax: **0492+Pwr

RX Mode Data: **0491+Pwr

RX Mode Reset: **0490+Pwr

<<HUAWEI>>

--------------------------------------------------------------------------------

Huawei ETS-668, 678, 688, etc Nam Programming:

Debug Mode: ##44+Menu

Debug Screen: ##33+Menu

CDG2 Test enable: ##234+Menu

CDG2 Test disable: ##432+Menu

China Lang Select: ##123+Menu

Blocking Debug Code: ###888+Menu

Home System Only On: ##461+Menu

Home System Only Off: ##460+Menu

<<ERICSSON>>

--------------------------------------------------------------------------------

Ericsson A1228c, T61, etc Nam Programming:

Short NAM: 987+Menu

Long NAM: 923885+Menu+Spc

CDMA Mode: 904093+Menu

Analog Mode: 904095+Menu

QNC: 904097+Menu

Debug Screen: 904090+Menu

DM Mode: 904050+Menu

Sony-Ericsson T608 Nam Programming:

Nam Set: 923885, Joystick to the right, 111111

<<EPSILON>>

--------------------------------------------------------------------------------

Epsilon vc-5x Nam Programming:

Nam Set: **147258963##

Programming1: **1232580##

Programming2: **321456987##

Version: **1470963##

Debug: **000000##

Menu_1: **078987##

Menu_2: **1234756##

A-key: 2539**

Reset: **14789##

<<GIGA TELECOM>>

--------------------------------------------------------------------------------

Z510, Z710i(gcd-456) Nam Programming:

Nam Set: Menu+0+Spc

<<AnyDATA>>

--------------------------------------------------------------------------------

AMC450 Nam Programming:

Nam Set: *74269#*748#96148063+SEL

<<GTRAN>>

--------------------------------------------------------------------------------

Gtran gcp-2000 Nam Programming:

Nam Set: 01#737+Spc

Debug Menu: 01#324+Spc

Debug Mode: 01#727

Test Mode: 01#764+Spc

System Test Mode: 01#768+Spc

Gtran gcp-5000 Nam Programming:

Debug Mode: 01#727+Spc

Test Mode: 01#765

<<PANASONIC>>

--------------------------------------------------------------------------------

PANASONIC TEST MODE:

Panasonic (Most):

1) Turn on the phone. Press #7764726# choose SEND

2) Scroll down to where it says "NAM 1" and choose OK. Scroll down

to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor"

and choose EDIT.

3) Press 1 and choose OK then choose BACK. The phone will say

"Back To Level 1" choose YES. Now choose EXIT the phone will ask you

"Exit And Save Change" choose YES.

4) Signal strength is the top right number on the screen.

5) To turn off the test mode follow the above sequence except press 0

instead of 1 at the "Built-In-Monitor"

<<SYNERTEK>>

--------------------------------------------------------------------------------

Synertec S200 Nam Programming:

Nam Set: Menu+0+Spc

Debug Mode:

Test vibro/rx/tx: ##5555+Save

Debug Screen: ##33+Save

Debug Screen: ##523+Save

RF Test: ####+Save

Unknown code: ##325+Save

<<SONY>>

--------------------------------------------------------------------------------

Sony CM-M1300, 3300, Z200 Nam Programming:

Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc

Klo buat Modottel WTE 320,gimana ???

Santo

Ada yang tau setting nam FWT KT-T 810/1910. (model name = KT-T810F)
Bentuknya seperti modem, dan digunakan untuk tlpn, fax atau data (internet).

thanks atas bantuannya.

mau nanya, kalo setting NAM untuk motorola ms250 gimana???
kalo liat ESN motorola ms250 gimana caranya???
code untuk motorola ms250 gimana???
makasih sebelumnya

ada yang bisa bantu bgmn penerapan setting a-key pada cdma lg cyon 5000?

apa yg dimaksud setting A-key & bgmn cara ngesetnya pd LG Cyon 5000?

Pak mau tanya
Saya punya cdma motorola startac 2004(Sk Telecom)
gimana caranya mau isi no fleksi/starone
soalnya ada tempat ruim tapi nggak mau baca ruimnya
saya pake code #758353266#646#
cuma minta isi no saja, tadinya ada signal jadi hilang setelah saya isi no fleksi
gimana caranya supaya hpnya bisa dipakai, thanks ya

gw pake samsung a460 sprint:

Nam Set: ##Spc -> ngak ngerti
Test Mode: 47*869#1235 -> ngak jalan
Debug Menu: ##33284,ok -> jalan
Service Menu: Menu+8+0 (#889) -> ngak ada tombol +
Reset (Life time, Clear Memory, etc): ##786,ok -> ngak nyoba
A-key: ##2539,ok -> jalan tapi kosong
Label Selection: ##3882,ok -> ngak jalan
Label(Home, Work, etc) : **523,ok - > ngak jalan
NGG Setting (Gateway, etc.): ##2769737,ok -> ngak jalan
Vocoder: ##8626337,ok -> ngak jalan
CAI Change: ##7738,ok -> ngak jalan
Enable TTY: ##889,ok -> ngak jalan

yang gw mo tanya:
1. nih hp bisa pake esia ato ngak sih? di label belakang hp nya ditulis dual band trimode.
2. A-key buat apa sih?
3. NAM itu apa & buat apa?
4. gimana cara ngereset phone code nya? karena gw ngak tau phone codenya berapa... di bukunya ngak dikasi tau phone codenya, & kayanya nih hp 2nd dari luar negeri.
5. kalo masuk ke menu, trus masuk ke menu setup, trus pencet 0, keluar "fild serv" & ada disuru masukin 4 digit lock code, buat apa sih?
6. kalo masuk ke menu sound, trus pencet 0, keluar "TTY/TTD" & disuru masukin 4 digit lock code juga, buat apa nih? gw ngak tau berapa codenya
7. kalo masuk menu voice dial, trus pencet 0, keluar "hidden set" trus keluar 7 menu, menu ini isinya mengenai "GPS" semua, ada test nya dll, tp ngak ngerti nih, ada yg bisa bantu jelasin?
8. di "debug mode" ada menu: "voice SO" -> buat apa yah?, "toggle QNC" -> apa tuh QNC??

Saya punya Sanyo Sprint SCP 4900. Saat ini hp itu diinject no flexi pasca bayar dan diblokir. Saya sudah coba bawa ke Starone dengan setting NAM yang saya tau.

Yang saya (dan pihak StarOne) tidak tau adalah cara setting Primary dan Secondary Channel A/B.

Ada yang tau? Mohon bantuannnya. Terima kasih buanyak.

SETTING
Samsung A460
47*869#1235 - Test Mode
Test Mode Commands:

001 suspend
002 reboot

004 Show mode
034 Send ESN
035 Product Info

##135798 : Service Menu
1: Basic
Display/Set :
MOBILE Phone Number (10digit)
NAM MSIN (3digit)
NAM Home SID (5digit)
2: General
Display/Set :
ESN
CAI Revision
Origination SVC OPT
SCM
Lock code
SLOT MODE (Yes/No)
SLOT CYCLE INDEX
3: NAM
Display/Set :
NAM Home NID
NAM MOBILE Country Code
NAM MOBILE Network Code
NAM ACCOLC
NAM CDMA Home Sys Reg (Yes)
NAM CDMA FSID Reg (Yes)
NAM CDMA FNID Reg (Yes)

##786 OK : Reset Phone
Lifetime
Clear Memory

Modottel gimana ya?

Punya temen saya wte 320, ke lock di 800Mhz, cuman bisa buat esia/fren. Ada cara nggak (SELAIN KE SERVICE CENTER...muahal euyyy....), supaya bisa dipake juga RUIM nya buat flexi 1900Mhz?...

Trims.

Kalau setingan LG LX5350, kumaha

@VCS
Yo.. ..emang benar internet starone pake wte320 paling oke dan ngga trouble, dikamar gua yg sinyal cuma 1 bar (itupun antenanya hrs ditarik) lancar dan stabil, pas nyoba pakai flexy baru 10 mnt udah putus padahal sinyal 2-3 bar

Bos kalo untuk Nokia 6255 setingnya gimana seh ????? truz pengruh settingan ini buat apa??? bisa bikin cepet internetnya nggak??

mas ryan dan mas cyber, kalo audiovox thera saya gak bisa mengaktifkan nam 1, gaimana ya?
ceritanya : saya beli 2nd dgn no flexi classy di nam1 dan kemudian no lama tsb dicabut (atas permintaan saya), saya is nam 2 dengan fren, hasilnya Ok.
Kemudian saya isi nam 1 dengan flexy classy, injectnya berhasil, tetapi pada setting nam1 itu tdk mau ditimpa dengan no baru.
Modem tdk ke lock, dan saya telah coba dengan hard reset hasilnya tetep aja.
Sebelumnya saya ucapkan tengkiyu nih.

wow thanx banget ya infonya!

Samsung SCH N356 saya coba-coba masukkin a-key pake checksum dari ESN (pake a-key calculator) = 037624 trus ada tulisan "A-KEY Berhasil Disimpan" abis itu hape saya nggak bisa dipake nelpon ataupun terima..... PLZ HELP!!!!

Bung Ryan Antony,
Bagaimna melihat A-key pada SCH N356 Samsung Fren? please help me...

Apakah harus dimasukin a-key ketika akan menginjek flexi (saya di malang, flexi bekerja pada 800 MHz)

mohon pencerahan

Mas gimana kalo melihat a-key Samsung SCH N356?
Udah saya masuk menu+6+* 000000
trus ada a-key ditombol kiri, but ngga ada tuh?
Gimana dong..
Please bantuannya!
Gimana cara ngeliat a-key nya?

Fren,

Untuk meliat Akey hal yg tdk mungkin, karena Akey itu didapat dari perkawinan antara MIN dgn ESN maka di hasilkanlah Akey+Checksum.

dan kalau kita mau inject kita harus dateng ke operatornya. oleh operatornya Akey tersebut akan di input ke dalam handset langsung, dan kita(pelanggan) tdk pernah tau berapa Akeynya.

Untuk operator Fren, esia dan S1 itu Akeynya Random, jd tidak akan sama...

Kalau saya beli fren perdana, apakah saya bisa ngaktifin sendiri dng cara seting nam-nya? kalau di bandung parameternya apa saja sih?

kalau untuk inject, bos hrs dateng ke galery M8 untuk diaktifkan di handsetnya, karena nanti akan di kasih MIN dan diinput akeynya.

handsetnya apa????

setting parameter:

SID : 10530
prm Ch A : 283
prm Ch B : 384
Sec Ch A: 691
Sec Ch B: 466

Network Code : 28
Country Code : 510