Halo salam perkenalan sama semua anggota disini,

Bung Diditnya
saya sudah mencoba flash 98, 99, 9AR, 9BR kombinasi sama GIKE + LP0021, hasil memang layar E398 menjadi bening tanpa ada kemerahan, kamera tdk terlalu banyak perubahan secara kasat mata, tapi malah saya menemukan beberapa bug, apa benar demikian, antara lain :

1. pada mode kamera dgn mengunakan english ada tampilan % pemakaian memori, tapi bila mengunakan bahasa Indonesia tdk ada % pemakaian memori-nya, benar demikian ?

2. Pada mode kamera, tekan menu --> Kapasitas memori --> tekan menu lagi, setelah itu keluar dari menu sampai pada layar utama, bila saya lakukan langkah tersebut maka E398 akan restart, bagaimana dgn punya bung Diditnya ?

3. Pada menu media, mis. Picture --> Menu --> Kapasitas memori, tidak bisa dilihat, tapi sebelum saya pasang LP0021 dapat dilihat status memorinya, apa benar demikian ?

4. Pada menu telepon, waktu menyimpan data baru tertulis "Simapan" seharusnya "Simpan" apa bisa diperbaiki ?

5. Tidak ada menu engineering, padahal sudah saya aktifkan seem 0032-0001

6. Animasi dapat saya aktifkan, tapi coba masuk menu media, pada saat memilih menu tersebut icon-icon-nya menghilang, padahal sudah diganti mma_ucp dgn yg original, demikian juga dgn skin moto tetap yg original.

Bung Ya_Saya,
1. kalo pakai MP 95_A, ada masalah tersebut diatas gak ya ?
2. kalo pakai MP V398 versi 1, 2, dan 3 buatan eyesonly yg di Hofo bagaimana apa ada bug semacam tersebut diatas ya ?
3. pasang MP V398 punya eyesonly, bisa pakai RSD lite gak ?
4. saya kemarin ke CS motorola yg di Jln. Industri, ternyata ada casing warna silver kombinasi merah, bagus loh ... kalo mau silakan tanya langsung ke CS tersebut aja.
5. Handsfree untuk mendengarkan radio ternyata oke stereo banget, kayak kita dengerin MP3 di handsfee aja cuma harganya Rp 225 ribu, mahal banget ya ...

Tolong semua dijawab ya, kalo ada rekan-rekan yg lain bisa bantu apalagi.

Terima kasih.

1. Terjemahan bahasa INGGRIS ke INDONESIA, pada mode bahasa Indonesia menjadi lebih banyak kalimatnya, jadi layarnya mentok dan tidak dapat menampilkannya secara penuh.

2. Wah iya neh.. ane baru ngeh........ waduhhhh... saatnya FLASHING.......

3. Masalah LP0021 kayaknya......

4. di phone ane "Disimpan"

5. ada kok....

6. Wah.. ane nga aktifin tuh om.. bentar deh nanti ane coba aktifin dan lihat gimana reaksinya.

@tr15
(2). E398 (9BR/GIKE/LP00021) saya tidak restart tu..
Mode kamera -> menu -> kapasitas memori -> menu -> layar utama..
baik pake kapasitas memori telp or trans ga restart.. yang sering restart malah kalo akses SIM application (satelindo@ccess)..

Mas TR15

Makasi info casingnya..

I.1. Saya pake LP0033 sekarang, jadi gak bisa cek yg bahasa Indonesia-nya, tapi kalo pake Russian, Hebrew sama Arab-nya ada % nya.

I.2. Nggak masalah punya saya.

2. Rasanya nggak juga lho Mas Tris

3.V398 saya pasangnya pake RSD.

4.

Terimakasih atas responnya,

Menu engineering sudah dapat saya tampilkan dgn edit mma_ucp, dari menu ini saya dapat lihat laporan panic berapa kali E398 mengalami crash, selain itu ada yg tahu fungsi engineering yg lain gak ?

animasi pada sebagian menu bisa digunakan ada beberapa yg tdk bisa digunakan.

menu -- daftar telp -- edit -- pilihan simpan ke SIM atau ke telp tertulis "simapan" he..he..

Kalo bung Diditnya sudah ganti flash & flex-nya berarti memang flex & flash tersebut kurang sempurna ya... terbukti saya dan jeng_rukmi mengalami crash di E398B gak tau rekan yg lain...
9AR + GSKE gimana ?... saya cuma pernah pake 9AR + GIKE

Bung ya_saya atau rekan yg lain bisa kasih tahu link MP V398 v4 ?
mau ganti pake MP V398 v4 ah...

@ Mas TR15, kopi paste dari motomoders :

Quote:

FEM (Engineering Menu) Guide

FEM list:

Cell Management
-Cell Sticker
--Target ARFCN: off/on
-Cell Change Warning
--Message: off/on
--Tone: off/on
-CBA: normal/inverted/ignored

Net. Messaging
-Paging: normal/ignored
-L3 Messages Filter

Field Test Status
-Availability: FTS/off/SBCM/Other
-Cell Change Warning
--Message: off/on
--Tone: off/on
-Edit Favorites
-Edit Visibles
-Debug Info

Information Viewers
-Panics
--4)00010a00 08.17
--3)00010e00 08.17
--2)00010a00 08.17
--1)00010a00 08.17

Phone Capabilities
-MS Op. Mode: B/CGSM/CGPRS
-Gp Auto Attach: off/on
-DSM: Allowed/Core Wait Allowed/Forbidden

Data Calls
-Level 1
-Level 2
-Level 3
-Level 4

-Cell Managment-

Cell Sticker- That makes the Phone stick to it's current cell untill no signal is available from it.

Target ARFCN- ARFCN(Absolute Radio Frequency Channel Number) Is the Channel you want on a particular cell.

Cell Change Warning- Notifies you when you change from cell to cell (ie tower to tower or transmitter to transmitter) Usually changing from the 850 transmitter on cing to the 1900 transmitter on ATT will give you a cell change bleep as well.

>>Message - displays a message on the screen when the cell has changed

>>Tone - does the alert beep when the cell changes

CBA- Cell Bar Access, This changes the access list for cells so that you can't access certain ones (basically roaming partnersor bad cells ) you can leave the list as programmed or invert the list (changes list so normal cells are blocked and blocked are only ones available) and ignored just lets you hop on any cell you want. I've yet to see if the sim card overrides this.

-Net. Messaging

Paging- Messages are sent to a phone when a channel becomes full or a cell becomes loaded telling the phone to switch to another channel or tower. If ignored you will stay on the same channel and tower because the phone doesn't know any better.

L3 Messages Filter- When an L3 Message is sent from the tower if it is not exactly 16 bits in length the phone should be set to filter it out. If allowed to pass the channel info could be corrupted. To understand this one you must first understand GSM Basically There are 3 layers L1 L2 L3

>>>Layer 1 - This is the physical layer basically it transmits all the infomation.

>>>Layer 2- This is the link layer, basically it conditions the signal,ie error checking channel monitoring and handoffs.

>>>Layer 3- This is the network layer which establishes maintains and terminates the channel.

Field Test Status

-Availability- Turns access to the field test system on or off. (SBCM i'm not sure what that one means though)

-Cell Change Warning- Same As before, Notification of cell changes through message or alert tone.

Edit Favorites- You can store favorite screens in the Field Test System - In here you can add or delete them.

Edit Visibles- This lets you edit which screens and what information is visible in the FTS screen.

Debug Info- Self Explanitory

Information Viewers
-Panics- Basically every time your phone locks up or crashes it's stored as a panic, it even gives the diagnostic error code for the motorola techs to diagnose.

* quote:
*
* --4)00010a00 08.17
--3)00010e00 08.17
--2)00010a00 08.17
--1)00010a00 08.17
*

Basically your phone crashed 4 times on S/W ending in 08.17

Phone Capabilities

-MS Op. Mode: B/CGSM/CGPRS - This is basically the Mode of transmission for your phone IE CGSM(voice) CGPRS(Data) and B for both. Basically unless you have an issue with talking or using data i'd leave it on both.

-Gp Auto Attach: off/on - This is the GPRS Auto Attach If turned off you have to manually initiate the GPRS connection with the towers. If not It automatically initiates the connection when registering with the cell.

-DSM: Allowed/Core Wait Allowed/Forbidden - This is the cool one DSM is Deep Sleep Mode- It allows it, Allows only the core wait (processor Halt) and Forbids it. basically if your phone goes into DSM all that's powered is the Radio Transmitter listening for signal. If it gets a call it powers the phone back up and rings. This also coincidentally is the feature that if people with the v551 white screen problem would turn to forbid it should fix it. They would get lower battery life but it should work. No guarantees there.

Data Calls-

Lvl 1-4 - Not sure on that one, my guess would be the timeslots used by the GPRS section 1-4 timeslots??

Also what phone are you using, Personally I'm referencing my v551. to get into FTS once enabled. i use the main menu key, then the top left soft key. the FTS has been the same since my old t720 i had. But it would help to know what phone you're using. Also you can type menu 073887* and turn test mode on and that will enable FTS. BTW if the screen turns all white and orange. just reboot the phone then you'll get the text on fts. I don't know why it does that but that's how it works on my v551

-Wayne

Originally Posted by: BajaMnstr

gw baru dikasih t720,ada beberapa pertanyaan nih:
1.klo trima sms/ada tlpn masuk LCD luar emang ga nyala?
2.knapa klo mo downlod lewat GPRS kdg suka g bisa,kluar tulisan 'tha page is too latge to send back'
3.support true tones kayak mp3 ato wav ga ya?
pls yg tau kasih infonya dong.....