Berhubung belum ada juga yang buat, terpaksa ane buatin nih treadh, supaya permoddingan dan perpatchingan W810i tetep bisa maju dan berkembang

Karena belum ada yang baru, ane kasih ini aja dulu deh...

Camdriver Baru, Update dari Raiderski 6.6

small update to clean some things...

camera driver v6.6.1

- improve:
in normal mode manual shutter speed is starting from 1/6400s (previously 1/5000s)
issue in EXIF: 1/6400s is visible as 1/5000s (this may be depends on firmware)

- improve:
manual shutter speed safe limits verification is no longer needed. somehow camera crash on long times in night mode isn't present any more
issue in EXIF: values higher than 2s are visible as 2s

- improve:
manual shutter speed always use ISO100 and exactly exposure time (thanks leetiran)
unfortunately this trick won't remember your color correction settings

Camera Driver Raiderski v6.6.1

@Sabre

Pake yang ini :

;W810-R4EA031

;The sms font become bold

;(c) bimasakti85

;[tautan dihapus]

44575D0C: 52 42

44575D18: 42 52

SETool2 lite v.1.10 udah keluar.

v 1.10 CURRENT

- added alternative security bypass for cid52 DB2020 phones.
it was stolen and released for free, so why not add it to setool2 lite ?

- now you CAN: readout files, use cross-cid flash, and apply .VKP for db2020 cid52 phones.

IMPORTANT INSTRUCTIONS:
select any db2020 model
press identify, note yours firmware version
get that firmware and add it to firmware area with "add" button
check "Bypass DB2020 security"
add text file with setool2 script command or .VKP script
press flash.
when asked, disconnect phone, remove battery, press "READY" in setool2, and attach phone.

i STRONGLY recommend use LATEST usbflash drivers (included in distributive) and use ONLY dcu60 for cid52 bypass.
(because with dcu60 time for security bypass is ~10 minutes, but with COM cable it is ~25 minutes)

note.
because way of security bypassing, entire "main" area damaged, so you should combine .VKP patches in one file...

Download di : [tautan dihapus]

wah FOPnya tinggi juga ya.
pengguna SE banyak yang suka Modding nih.
bagaimana dengan yang lain ? masak kalah

@SW
Wkwkwkwkkw
gapapa bro...

@achis
cara pakenya loe harus install dulu java environtmen, JRE ato apaan gitu, lupa ane, pokoknya java environtmen di PC, baru dah bisa pake, cuman ya itu....kalo ga salah filenya 50 MBan
Hehehehe....

@Arjuna
Thanx bro...tapi tu cuma SMS ja ya? kalo sama sistemnya yang mana bro...cos banyak banget font2, tp ga ngerti yg sm sperti yg china tu yang mana.
BTW sharing file di se-nse nya kok ga bisa dibuka semua ya? apa lagi down?

Update Raiderski 6.7.1!

camdriver v6.7.1 + config tool v0.5.3

changelog
Code:

driver:

- fix: sometimes incorrect values in saved EXIF parameters (reported by leetiran)

- improve: small correction in EM/ENM calculations for led and no led situations

- improve: compromise in WB and CC settings for led light

selected WB | color correction

--------------------|-------------------

auto | warm (combination of red* and yellow**)

incandescent (cold) | warm (as above)

other (warm) | none (daylight, cloudy, fluorescent are warm)

* - will be applied only if cyan/red is not manually increased by user/profile

** - will be applied only if yellow/blue is not manually increased by user/profile

- improve: stabilized functionality in driver type \"standard + manual focus\"

- macro on -> off = manual focus untouched, zoom can be set and it will not

destroy manual focus

- macro off -> on = zoom untouched, focus can be set but after snapshot zoom

will be x1 because of preview x1/x4 screen switch in manual focus mode

tool:

- improve: functions are recognized by text descripton not by constant #NAME which is much more

flexible solution (unfortunately drivers earlier than 6.7.1 are incompatible)

1. not worth to mention

2. a bit better EM/ENM

3. led settings from 6.7 were good but only if room isn't lighted up with incandescent light source (warm yellow light). this combination produced very yellowish pictures because of fluorescent WB (warm) type used in led settings. led light is cold, that's why i used fluorescent WB (as in original driver) to make it warmer. in any other case, for example in natural light (even low) led color correction was fine. i decided to create much more flexible solution. this time led do not use any own WB settings but only warm color correction if necessary. led settings will cooperate with WB selected in menu - you can try to make led photos with every possible WB and observe results. with this type of settings in room with incandescent light source i can select auto WB and use led light - final color balance will be much better. one more thing, 6.7.1 will not use color correction for led if you change any of colors (cyan/red, yellow/blue) to manual mode (above x1.0). so, for example: you can set any (above x1.0) red correction and this correction will be visible on photo taken with led. simply, you will not lose manual color correction settings, which is very important

4. nothing more to say, everything is described (you can find this solution also in Kriomag 21.93 beta)

this versions of driver & tool are after small facelifting, so, pay attention on potential issues. i hope you'll not find anything for me it works very good

Download
[tautan dihapus]

@SW, Fezzo ID, Arjuna, BM ato sapa aja lah
bro....minta file2 vkp punya loe dong....males nih donlot satu2...
di zip aja
Thanx B4

ada yang udah pernah coba ini?
[tautan dihapus]

udah lama ga posting disini,,

@Sabre
kalo yang tulisannya kurus2, aku ngedit dari layout.xmlnya biar permanen..
backup aja dulu yang aslinya,,trus apply yang ini

patch2nya untuk yang generic kan??
sudah kuzip dan silahkan ambil disini

Smangat trus bro Sabre,,paling konsisten nih,,huehue

@BM
Thanx bro buat file2 vkpnya....untuk layout XML punya ane juga udah ane ganti sama yang no operator logo, tapi waduuh...ane lupa yang ane ganti,jadi pake patch aja dah....

alow all...

ada yang bisa ngajarin ganti "Right Desktop Softkey" (dari "menu" jadi "operamini")???
ngikutin tutorial yang di se-nse gagal mulu...mohon bantuannyahh...
maturnuwuntengkiyu

bro...ada yang udah pernah pake patch confendiality belom?
caranya gimana sih ngeset passwordnya? harus berapa digit? trus cara swap black list to white list gimana?

ada yang punya patch extended file manager? supaya kita bisa buka TPA dan IFS di File Manager, trus bisa copy paste juga?

Ini perbandingan Sarmad 6.0 sama Raiderski 6.7.1

Sarmad 6.0

Raiderski 6.7.1

Menurut ane punya Raiderski lebih sharp, Sarmad 6.0 autofocusnya bermasalah, tapi kalo pake manual focus OK banget hasilnya.
ane kembali ke Raiderski aja deh....

wow.........
thanx bgt infonya bro sabre
kayanya gw jg harus cobain pake raiderski tuh

@Sabre
Ini patch yang buat ngurusin font system sekaligus ngebuat font sms kaya di china.

;W810-R4EA031
;Change the system font become thin
;(c) bimasakti85
;[tautan dihapus]

44575D0C: 52 42
44575D18: 42 52
44575D30: 52 42
44575D3C: 42 52

@Sabre_Zoo
sejauh ini si gw lebih prefer ke Kriomag, cuman sayang ngga dilengkapi "Fast EM".
mo nyoba2 pake punyanya Raiderski dulu.

Selamat mencoba Raiderski bro....

Ane kasi tips supaya kita bisa menyenangi super mode.

1.Walau namanya super mode dan memiliki banyak fungsi manual, tapi tetap perlu diingat, bahwa camdriver supermode itu juga bisa digunakan seperti cam driver standar, ga perlu di set manual semua ini itunya, cos standar super mode itu udah bagus (ya seperti camdriver type standar kriomag dan sarmad) tinggal jepret aja gambarnya udah bagus.(setting auto semua)

2. Kalau loe udah pada terbiasa dengan nomor satu diatas, suatu saat mungkin loe ingin mengoptimalkan gambar loe(inilah fungsi supermode yang sebenarnya, mengoptimalkan hasil gambar), terkadang apabila foto sawah yang hijau, mungkin saat anda foto, hijajunya tidak serupa dengan aslinya, untuk menyamakannya pakailah manual green color.pasti nanti akan ketemu yang sesuai. sama juga dengan fungsi2 yang lainnya, dipakai saat kondisional aja, tidak perlu selalu set manual.

Udah ngerti kan?

Untuk camdriver, buat yang belum ngerti kata2 ane di nomor 2, silakan boleh cek dengan camdriver favorit loe masing2. coba aja loe foto2 objek dengan warna yang berlainan, seperti objek yang berwarna hijau, kuning, merah, biru dll....

nanti loe akan lihat ada beberapa perbedaan warna object asli dengan hasil foto loe(itu pasti !).
pasti akan ada warna yang sesuai dengan aslinya dan ada yang tidak, semisal warna biru sesuai dengan warna aslinya, tapi warna merah tidak sesuai dengan aslinya, disinilah supermode digunakan, untuk menyesuaikan warna asli semisal merah yang tidak sesuai kita gunakan manual red color dsb. kalo loe pake camdriver yang ga super mode, pasti cuma beberapa warna aja yang sesuai dengan warna aslinya, tidak mungkin semua warna, karena memang begitulah kinerja camdig.

@arjuna
Thanx bro....
tapi ane pengennya semuanya bold kaya yang china, ya SMS, System date and time dll.

@Sabre_Zoo
bukannya patch dari bro arjuna itu ukuran fontnya udah sama kaya china bro